15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 02/03/12 schematics allied da tec ode AGSC-5001S dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) j x y z a b p in1 h c d g f e 1.1(27.94) 0.30 (7.62) 0.016 (0.41) 0.34 ( 8.64 ) 0.960(24.38) 0.040 ( 1.02 ) 0.430 ( 10.92 ) 0.010 (0.25) 0.035(0.89) 0. 450( 11. 43) 0.079(2.03) 8 degrees 0.025 (0.64) all specifications subject to change without notice. mechanical 10/100/1000 base t gigabit dual port AGSC-5001S cw/w: 25pf typ @ 100khz, 0.2v polarity: 1-50, 4-47, 7-44, 10-41, 14-37, 17-34, 20-31, 23-28 in-phase ll: 0.5h max @ 100khz, 0.2v dcr: 0.9 operating temp: 0oc to 70oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 0.2v turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 1-100mhz 1-30mhz 40mhz AGSC-5001S 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -15 60-80mhz -12 50mhz -13 part number AGSC-5001S electrical speci?cations @ 25c common mode rejection (db min) hi-pot (vrms)60s -35 1500 30mhz -40 100mhz -30 cross talk (db min) 1-100mhz -40 60mhz isolation ?
|